Print. Cut. Action. The PRO III XC-540 is the ultimate high-volume production tool for stunning indoor and outdoor banners, signs, vehicles, decals, POP displays and more. Numerous upgrades make this Roland's most advanced printer/cutter ever including an impressive maximum print speed of 441 sqft./hr., a 6-color configuration utilizing precision dot placement, a tri-heating system, and an advanced media feed and automatic take-up system for longer, more accurate, production runs that deserve a close-up. Get ready for the Roland PRO III XC-540. Maximum 1440 dpi resolution and Roland's innovative Print&Cut technology combine for outstanding image quality and precision contour cutting Ideal for a wide variety of applications including labels, decals, POP displays, banners, vehicle graphics, signs and more Powerful VersaWorks 2.0 RIP software is packed with upgrades including a new spot color library, and functions for spot color replacement, clipping and auto-nesting Impressive maximum print speed of 41 m²/h (441 sqft/hr) for high-volume production of billboards and large banners An optional heater and blower for even greater productivity A new, faster superior quality mode prints at 14 m²/h (150.7 sqft/hr) for indoor banners with optimum droplet control and ink density Integrated tri-heater system quickly dries a wide variety of media for immediate finishing, installation or collection by the take-up roller, even in high-speed mode Seamless integration of hardware, software and fully-optimized RIP software deliver the enhanced scratch resistance, quicker drying time, and higher ink density required for outdoor applications Included take-up roller supports up to 30 kg (66.15 lbs.) for unattended, high-volume production

PDF Product Brochure (809K)

SPECIFICATIONS: ROLAND XC-540 PRINTER/CUTTER
Printing/cutting method		Piezo ink-jet method/media-moving method
Acceptable media widths		260 to 1371 mm (10-4/16 to 54 in.)
Printing/cutting width*1		Maximum 1346 mm (53 in.)
Ink	Type	ECO-SOL MAX cartridge
	Capacity	220cc or 440cc cartridge
	Colors	6 colors (cyan, magenta, yellow, black, light-cyan, and light-magenta)
Printing resolution (Printing dot resolution)		Maximum 1440 dpi
Cutting speed		10 to 600 mm/s (10 to 300 mm/s in the media-feed direction)
Blade force		30 to 300 gf
Blade offset compensation		0.000 to 1.500 mm (0 to 0.0591 in.)
Distance accuracy	While the print heater and dryer are running *2	Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
	While the print heater is not running *3	Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (When cutting) *4		Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ±0.2% of distancetraveled, or ±0.1 mm, whichever is greater
Repetition accuracy (When cutting) *4*5		±0.1 mm or less
Repetition between printing and cutting *4*6		±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media *4 *7		Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Media take-up system	Roll outer diameter	Maximum 180mm (7.2in)
	Roll weight	Maximum 30kg (66.15lbs)
Heater *8		Preheater, print heater, Setting range for the preset temperature: 30 to 55°C (86 to 122°F)
Interface		Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power supply	Voltage and frequency	AC 100 to 120V ±10%, or AC 220 to 240 V ±10%
	Required power capacity	13 A (100 to 120V) or 7 A (220 to 240 V)
Power consumption	During operation	Approx. 1600W
	Sleep mode	Approx. 47W
Dimensions (With stand)		2694 (W) x 1065 (D) x 1260 (H) mm (106-2/16 (W) x 41-15/16 (D) x 49-10/16 (H) in.)
Weight (With stand)		197 kg (338 lb.)
Environmental	Power on	Temperature: 15 to 32°C (59 to 89.6°F) (20°C (68°F) or more recommended), humidity: 35 to 80% (no condensation)
	Power off	Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80% (no condensation)
Included items		Stand, dancer roller, rail slider, roll shafts, paper pipe, power cord, media flanges, drain bottle, media clamp, blade, blade holder, replacement blade for separating knife, SOL INK cleaning cartridges, Software RIP, User's Manual, Setup Guide, and cleaning kit, etc.

*1 The length of printing or cutting is subject to the limitations of the program or driver.
*2 Media type: Roland SV-G-1270G, print travel: 1 m
Preset temperature for the print heater: 37°C and the drier: 40°C
Temperature: 25°C, humidity: 50%
*3 Media type: Roland SV-G-1270G, print travel: 1 m
Temperature: 25°C, humidity: 50%
*4 Not assured when the print heater is used.
*5 Media type: 3M Scotchcal Mastercut Film. Roll media must be loaded on the shaft. During cutting, [PREFEED] menu item must be set to [ENABLE].
Side margins: 25mm or more for each. Front margin: 35mm or more. Excluding expansion/contraction of the media.
Media wider than 610mm is assured up to 4,000mm long. Media 610mm wide or narrower is assured up to 8,000mm long.
*6 Provided that media length is under 3000mm. Temperature: 25°C (77°F).
Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7 Media type: Roland specified media, data size: 1000mm in the media-feed direction, 1346mm in the carriage-movement direction. No lamination.
Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to [ENABLE].
Temperature: 25°C (77°F). Excludes the effects of slanted movement and of expansion and contraction of the media.
*8 The print heater temperature may not reach the preset temperature depending on ambient conditions or the width of the media.
Unevenness in temperature may be larger depending on ambient conditions or the width of the media.