 |
Affordable Cutting Plotter
Mimaki's
precise servo-technology is utilized in the affordable CG60st.The speed,
accuracy and quality cutting demanded by sign makers are now available
at less cost.
User-Friendly Functions and Various Applications
The multi-copy function is simple to use
and can be set to produce up to 999 copies of the same data. The built-in
2MB receiver buffer frees the computer quickly for next job. Data larger
than the effective cutting area can be panelled by the plotter and overlaps
created. The mounted sheet receiver provides accurate tracking of materials.
The supported expanded mode allows the plotter to cut effectively up to
maximum 606mm(24") wide. The wider range of down pressure from 10g to
300g is for cutting various materials precisely.
Easier Operation
The
Multi-language LCD panel allows you to quickly select a desired function.
The test cut function is used to set up and check cutting condition before
starting a job. A Windows driver is provided and enables output from leading
drawing software (eg Corel DRAW, Adobe Illustrator). Tools storage is
available.
|
Convenient LCD operation panel
Tools storage
|
| SPECIFICATIONS: MIMAKI CG-60ST
CUTTING PLOTTER
|
| Acceptable sheet width |
50mm-711mm (Roll sheet: 50-670mm)
4"-30" (4"-26.4") |
| Effective cutting area |
586mmX51m (normal) 606mmX51m (expand)*1
23"x167'(normal)23.9"x167'(expand) |
| Maximum plotting speed |
50cm/s (19.7ips) |
| Adjustable speed range |
1-10cm/s (1cm/s step)
10-50cm/s (5cm/s step) |
| Mechanical resolution |
0.005mm |
| Command resolution |
0.025mm or 0.01mm (MGL-IIc) |
| Repeatability |
+/-0.2mm
(excluding shrinkage due to the film temperature) |
| Guaranteed cutting range |
586mmX2m (23"x6.56') |
| Maximum down pressure |
300g |
Range of
down
pressure |
Cutter |
10-20g (2g step), 20-100g (5g step),
100-300g (10g step) |
| Pen |
10-20g (2g step), 20-100g (5g step),
100-150g (10g step) |
| Acceptable sheet |
Vinyl up to 0.15mm thickness,
Fluorescent type vinyl, Reflective sheet*2 |
| Applicable tools |
Cutter, Water based ball point pen,
Oil based ball point pen*3 |
| Type of command |
MGL-IIc |
| Interface |
RS-232C, 8-bit parallel |
| Receiver buffer size |
2MB |
Operating
environment |
Temperature |
5-35 degree |
| Humidity |
35-75%(Rh) No condensation |
| Power requirement |
AC 100/120V, AC 220/240V |
| Power consumption |
100VA or less |
| Weight |
16kg(35.27lbs) |
* Specifications are subject to change without notice
|
